Tip Tools Nozzle Types

Wide Angle Flat Spray Tip

• Large, round free passages to minimize clogging
• Excellent to use with automatic sprayer controls
• Excellent spray pattern quality
• Superior drift control from 15-90 PSI (1-6 Bar)
• Automatic spray alignment with 25612-*-NYR Quick TeeJet cap and gasket

Air Induction Spray Tip

• Depending on chemical, produces large, air-filled drops
• Larger droplets for less drift
• Uniform coverage in broadcast spraying
• Nozzle spacing - 20 inches (50 cm)
• Spraying pressure - 30-115 PSI (2-8 bar)
• Automatic spray alignment with 25598-*-NYR Quick TeeJet cap and gasket

Extended Range Flat Spray Tip

• Uniform coverage at lower pressures
• Smaller droplets at high pressures for thorough coverage
• Nozzle spacing - 20 inches (50 cm)
• Spraying pressure - 15-60 PSI (1-4 bar)
• Automatic spray alignment with 25612-*-NYR Quick TeeJet cap and gasket
• Automatic spray alignment for sizes 10 and 15 with 25610-*-NYR Quick TeeJet cap and gasket

Standard Flat Spray Tip

• Good spray penetration
• Uniform coverage along boom
• Nozzle spacing - 20 inches (50 cm)
• Spraying pressure - 30-60 PSI (2-4 bar)
• Automatic spray alignment with 25612-*-NYR Quick TeeJet cap and gasket
• Automatic spray alignment for sizes 10 thru 20 with 25610-*-NYR Quick TeeJet cap and gasket

Drift Guard Flat Spray Tip

• Large droplets to reduce drift
• Removable pre-orifice
• Nozzle spacing - 20 inches (50 cm)
• Spraying pressure - 30-60 PSI (2-4 bar)
• Automatic spray alignment with 25612-*-NYR Quick TeeJet cap and gasket

Twin Flat Spray Tip

• Penetrates crop residue or dense foliage
• Smaller droplets for thorough spray coverage
• Nozzle spacing - 20 inches (50 cm)
• Spraying pressure - 30-60 PSI (2-4 bar)
• Automatic spray alignment with 25598-*-NYR Quick TeeJet cap and gasket

Wide Angle Flat Spray Tip

• Uniform coverage along boom
• Pre-orifice design produces large droplets to reduce drift
• Nozzle spacing - 20 inches (50 cm)
• Spraying pressure - 10-40 PSI (0.7-3 bar)
• Can be used with No. 25600-*-NYR Quick TeeJet cap for automatic alignment

Wide Angle Flat Fan Spray Nozzle

• Very large droplets
• Direct replacement for plastic hollow-cone, low drift nozzles
• More precise flow and distribution pattern
• Large orifice reduces clogging
• Nozzle spacing - 20-40 inches (50-100 cm)
• Spraying pressure - 25-75 PSI (1.5-5 bar)
• Use Quick TeeJet cap QJ4676-*-NYR

Standard Even Flat Spray Tip

• Ideal for banding over the row or in row middles
• Uniform coverage across spray pattern
• Spraying pressure - 30-60 PSI (2-4 bar)
• Automatic spray alignment with 25612-*-NYR Quick TeeJet cap and gasket
• Automatic spray alignment for sizes 10 thru 20 with 25610-*-NYR Quick TeeJet cap and gasket

Air Induction Even Flat Spray Tip

• Depending on chemical, produces large, air-filled drops
• Larger drops for less drift
• Spraying pressure - 30-115 PSI (2-8 bar)
• Can be used with 25598-*-NYR Quick TeeJet cap and gasket

Drift Guard Even Flat Spray Tip

• Ideal for banding over the row or in row middles
• 95° spray angle
• Excellent for band application of surface applied herbicides
• Pre-orifice design produces larger droplets to reduce drift
• Spraying pressure - 30-60 PSI (2-4 bar)
• Can be used with 25612-*-NYR Quick TeeJet cap and gasket

Twin Even Flat Spray Tip

• Ideal for banding over the row or in row middles
• Smaller droplets for thorough coverage
• Penetrates crop residue or dense foliage
• 40° or 80° spray angles
• Spraying pressure - 30-60 PSI (2-4 bar)
• Can be used with 25598-*-NYR Quick TeeJet cap and gasket

Air Induction Underleaf Banding Spray Tip

• Larger droplets for less drift
• Off-center spray pattern with flat spray characteristics
• Under leaf banding of pesticides or liquid fertilizers
• Used at the end of the spray boom around the perimeter of the field to protect sensitive areas
• Spraying pressure - 30-115 PSI (2-8 bar)
• Can be used with 25598-*-NYR Quick TeeJet cap and gasket

Underleaf Banding Spray Tip

• Off-center tip with tapered flat spray characteristics
• 85° spray angle
• Uniform distribution
• Spraying pressure - 20-60 PSI (1.5-4 bar)
• Ideal for banding (2 tips) and as an end nozzle on boom sprayers
• Underleaf band application of contact herbicides in combination with mechanical cultivation
• Band application of contact herbicides or liquid fertilizer

Off-Center Flat Spray Tip

• Adjustable spray swath when used with single or double TeeJet swivels nozzle bodies
• Available in stainless steel or brass
• Spraying pressure - 30-60 PSI (2-4 bar)

150° Double Outlet Flat Fan Spray Tip

• Produces medium to fine droplets
• Suggested for post-directed applications with hose drops in row crops
• Available in stainless steel or brass
• Spraying pressure - 20-60 PSI (1.5-4 bar)

• VisiFlo color-coded version consists of stainless steel or ceramic orifice in polypropylene body
• Spraying pressure - 30-300 PSI (2-20 bar)
• Ideal for banding with two or three nozzles over the row
• Finely atomized spray pattern provides thorough coverage

• Polypropylene body and ceramic orifice insert for long wear life
• Resists corrosion
• Accepts more abrasive materials
• Popular nozzle sizes fit most sprayers
• Operating pressures to 300 PSI (20 bar)
• Incorporates ISO color-coding scheme
• Ideal for banding with two or three nozzles over the row
• Finely atomized spray pattern provides thorough coverage